915nm Fiber coupled diode laser for fiber laser pump source 30W

BWT diode laser components are high-power, high-efficiency and high-stability products produced by professional coupling technology.

Products Details

Product Features

BWT diode laser components are high-power, high-efficiency and high-stability products produced by professional coupling technology. The product concentrates the light emitted by the chip into an optical fiber with a small core diameter through micro-optical components for output. In this process, every important process is inspected and aged to ensure product reliability, stability and long life. In production, the researchers continuously improve the product process through professional technology and long-term accumulated experience to ensure the high performance of the product. The company also continues to develop new products to meet the ever-increasing demands of customers.

Main Features

Wavelength:915nm Output power: 30W Fiber core diameter: 105μm Optical fiber numerical aperture:0.22NA Feedback protection: 1020nm-1200nm Applications: Fiber laser pump source

Instructions for use

- Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. - Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second. - Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber. - Use constant current power supply to avoid surge current during operation. - Laser diode must be used according to the specifications. - Laser diode must work with good cooling. - Operation temperature ranges from 15℃ to 35℃ . - Storage temperature ranges from -20℃ to +70℃. Minimum Order Quantity: 1 Piece/Pieces Delivery Time: 2-4weeks Payment Terms: T/T

K915FA3RN-30.00W

Specifications (25°C) Symbol Unit Minimum Typical Maximum
Optical Data ( 1 ) CW OutputPower Po w 30 - -
Center Wavelength λc nm 915±10
Spectral Width(FWHM) △λ nm - 3 6
Wavelength Shift with Temperature △λ/△T nm/°C - 0.3 -
Wavelength Shift with Current △λ/△A nm/A - 0.6 -
Electrical Data Electrical-to-Optical Efficiency PE % - 50 -
Operating Current Iop A - 12 13
Threshold Current Ith A - 1.2 -
Operating Voltage Vop V - 4.8 6
Slope Efficiency η W/A - 2.7 -
Fiber Data Core Diameter Dcore μm - 105 -
Cladding Diameter Ddad μm - 125 -
Numeric Aperture NA - - 0.22 -
Fiber Length Lf m - 1 -
Fiber Loose Tubing Diameter - mm 0.9
Minimum Bending Radius - mm 50 - -
Fiber Termination - - None
Feedback Isolation Wavelength Range - nm 1020-1200
Isolation - dB - 30 -
Others ESD Vesd V - - 500
Storage Temperature( 2) Tst °C -20 - 70
Lead Soldering Temp Tls °C - - 260
Lead Soldering Time t sec - - 10
Operating Case Temperature( 3 ) Top °C 15 - 35
Relative Humidity RH % 15 - 75
(1) Data measured under operation output at 30W@25°C. (2) A non-condensing environment is required for operation and storage. (3) Operating temperature defined by the package case. Acceptable operating range is 15°C~35°C, but performance may vary.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours