940nm Fiber coupled diode laser 10W used in Lidar

Wavelength:940nm Output power: 10W Fiber core diameter: 105μm Optical fiber numerical aperture:0.22 NA

Products Details

Product Features:

BWT laser radar application semiconductor laser mature product 940nm-10W has been put into the market in batches for many years, and it is a star product for radar applications. In addition to this product, BWT also offers 905nm-90W products. The power range is optional 20-200W and higher components. Provide customers with customized products. BWT adopts automated equipment to ensure the consistency of batch product performance; it has a strong ability to provide products in batches. In the production stage, we carry out multiple quality inspections on each chip and component to ensure that the output products have stable performance and can be used for a long time; the experienced technical team also provides support to meet the customized needs of customers.

Main Features

Wavelength:940nm Output power: 10W Fiber core diameter: 105μm Optical fiber numerical aperture:0.22 NA Applications: Fiber laser pump source Lidar

Instructions for use

- Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber. - Use constant current power supply to avoid surge current during operation. - Laser diode must be used according to the specifications. - Laser diode must work with good cooling.

PRODUCT PARAMETERS

Specifications (25°C) Symbol Unit Minimum Typical Maximum
Optical Data ( 1 ) CW Outputpower Po w 10 - -
Center Wavelength λc nm 940 ±3
Spectral Width(FWHM) △λ nm - 3 6
Wavelength Shift with Temperature △λ/△T nm/°C - 0.3 -
Wavelength Shift with Current △λ/△A nm/A - 0.6 -
Electrical Data Electrical-to-Optical Efficiency PE % - 50 -
Operating Current Iop A - 12 13
Threshold Current Ith A - 1.2 -
Operating Voltage Vop V - 1.6 1.8
Slope Efficiency η W/A - 0.9 -
Fiber Data Core Diameter Dcore μm - 105 -
Cladding Diameter Ddad μm - 125 -
Numeric Aperture NA - - 0.22 -
Fiber Length Lf m - 1 -
Fiber Loose Tubing Diameter - mm 0.9
Minimum Bending Radius - mm 50 - -
Fiber Termination - - None
Feedback Isolation Wavelength Range - nm 1400-1600
Isolation - dB - 30 -
Others ESD Vesd V - - 500
Storage Temperature( 2) Tst °C -20 - 70
Lead Soldering Temp Tls °C - - 260
Lead Soldering Time t sec - - 10
Operating Case Temperature( 3 ) Top °C 15 - 35
Relative Humidity RH % 15 - 75
(1) Data measured under operation output at 10W@25°C. (2) A non-condensing environment is required for operation and storage. (3) Operating temperature defined by the package case. Acceptable operating range is 15°C~35°C, but performance may vary.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours